您当前的位置： 首页 » 供应产品 » ION5822i微型离子风机
|
|
| 产 品： |
ION5822i微型离子风机 |
| 单 价： |
1.00元/台 |
| 最小起订量： |
|
| 供货总量： |
100 台 |
| 发货期限： |
自买家付款之日起 天内发货 |
| 更新日期： |
2011-05-16 有效期至：长期有效 |
| |
 |
|
«上一个产品 下一个产品»
|
5822i 微型离子风机欢迎登陆www.virtual-sps.com |
The Critical Environment In-tool Ionizing Blower Model 5822i is designed to meet small-footprint ionizer requirements in automated process tools, offering exceptional performance in hard disk drive manufacturing and backened semiconductor environments.
The ionizer maintains a ±1 volt or better balance with an optional external sensor or ±3 volts or better balance without a sensor. An internal automatic balance correction system ensures your target is ionized accurately, presenting a significant time and cost savings. | | | A collimator installed over the fan directs precisely balanced ionized air to the target without taking up valuable room in your environment. Internal circuitry suited for high humidity applications and 24 VDC input voltage makes the Model 5822i the standard choice for environments that need reliable, quality ESD protection in sensitive environments. | | Features & Benefits ±1 volt or better balance (±3 volts or better without external sensor)Remotely placed control boxProvides the best corona-based ESD protection available for maximizing yieldsSeparate control box allows greater flexibility in mounting while maintaining excellent in-tool performanceUnique Hydro Wave1bearing fanFan is optimized to provide long service while minimizing any particle generationFacility Monitoring System (FMS) connection and audible alarmFaster response to ionization failure with notification through tool or facility monitoring system | | | 1 Hydro Wave bearing fan developed by Panasonic (NMB-Mat branded DC axial fans) | | | | | | | | | Specifications | | | | | | | | | | | | | Input Voltage | 24 VDC at 400 mA from external power supply (100-240 VAC 50/60 Hz) or from tool power | | Chassis | Stainless steel | | Indicators | On Control Box: green power on LED, red alarm LED | | Ion Emission | Steady-state DC | | Emitter Points | Tungsten alloy; eight per blower | | Airflow | 20.5 cfm, typical | | Discharge | Between 2-2.5 seconds at one foot, typical, taken in-line from the center of the fan (±1000V to 100V)1 | | Balance | ±1 volt or better, typical, with external sensor; ±3 volts or better, typical, without sensor | | Cleanroom Class | Meets ISO 14644-1 Class 4 (Fed Std. 209E Class 10) | | Audible Noise | Less than 56 dB, typical, measurements taken 12" (30.5cm) from fan | | Mounting | Two mounting screw holes on bottom of blower | Operating
environment | Temperature: 50-95°F (10-35°C)
Humidity: 30-65% RH (non-condensing)
ISO Cleanroom Class 7 (Federal Class 10,000) or better | | Controls | Balance adjust, sensor gain adjust, fan "Slow, Off, Fast" switch, variable 'slow' fan speed | | Dimensions | Blower: 4.5H x 3.3W x 2.4D inches (11.5H x 8.3W x 6.1D cm)
Control Box: 1.0H x 5.2W x 2.4D inches (2.5H x 13.2W x 6.0D cm) | | Weight | Blower: 1.14 lb (.51 kg)
Control Box: .56 lb (.25kg) | | Warranty | Two year limited warranty | | Certifications | CE, TUV (both pending) |
| | | 1. Tested in accordance with ANSI/ESD STM3.1-2000 | | | | | | | | | | | Ordering Information | | | | | | | | | | | 92-5822i-001 | Blower kit (includes blower, control box, external power supply and all interface cables) | | 91-5822i | Blower | | 91-5822i-CTRL | Control box | | 14-21106 | External power supply | | 33-1720-8 | 4-pin cable, fan unit to control box | | 33-1740-1 | 6-pin cable, FMS out to Novx sensor | | 25-20660 | US plug power cord, 8.2 ft. (2.5m) | | 25-20710 | UK plug power cord, 8.2 ft. (2.5m) | | 25-20735 | German Schuko plug power cord, 8.2 ft. (2.5m) | | 25-20750 | China plug power cord, 8.2 ft. (2.5m) |
| | | | | | | | Sensor Feedback
The Model 5822i ionizer's optional sensor input operates with the Novx Series 7000 Monitor, Novx Series 3150/ 3350/3360 Controller or other industry-standard ionization controllers to detect and automatically correct the offset balance. With the sensor's antenna placed at the target area, feedback is sent to the Model 5822i blower's internal control system. This ensures that your target maintain a 1V or better balance at all times, no matter what environmental variables exist. | | | | | | | | Directed Airflow
The patent-pending collimator fits over the fanstack of the blower and directs ionized air straight to the target. This means that the blower can be placed further away from the target with continued excellent discharge times and reach. This faster, directed airflow method improves ionization delivery and static elimination, significantly minimizing ion recombination. | | | | | | | | Separate Control Box
The Control Box was developed to accommodate tight tool size definitions. The Control Box connects to the optional Novx Series 7000 Monitor or Series 3150/ 3350/ 3360 Controller or other industry-standard sensor and common FMS (facility monitoring system) interfaces. This allows the blower to be installed into tight, hard-to-reach spaces without fitting additional connections or wiring into the area. | | | | | | | | | |
|
|
| 型号 | ION5822i | 品牌 | ION | | 类型 | 台式离子风机 | 气流方向 | 横流风机 | | 材质 | 不锈钢风机 | 风机压力 | 高压风机 | | 性能 | 低噪音风机 | 用途 | 船用风机 | | 离子风量 | 1（cfm） | 消电时间 | 1（s） | | 输入电压 | 1（V） | 适用范围 | 1 | | 安装距离 | 1（cm） | 离子风区有效范围 | 1 | | 离子平衡度 | 1 | | |
|
|
 产品分类联系方式
- 联系人：徐勇（先生）
- 职位：（经理）
- 电话：051266324899/88869986
- 手机：13706139281
- 传真：051266324855
- 地址：苏州市新区狮山路75号狮山峰汇1幢610
友情链接 |
点击图片查看大图